Screw-in cylinder with stroke limiter

Screw-in cylinder with stroke limiter

These screw-in cylinders are used as space-saving clamping cylinders. They are ideal for clamping devices on presses. The cylinder is characterized by its compact design.

These screw-in cylinders are used as space-saving clamping and clamping cylinders. The cylinders are suitable as construction modules for a wide variety of tasks. They are ideal for clamping devices on presses. The cylinder is characterized by its compact design. Thanks to the internal stroke limiter, the cylinder can also be operated without a counter clamping surface. The piston rod end is crowned.

The screw-in cylinder is only single-acting hydraulic. This ensures clear extension times. The cylinder is reset via an integrated compression spring. For this reason, the reset time cannot be precisely determined. The pressure oil is supplied via drilled channels.

Special features:

  • fully retractable housing
  • with internal stroke limiter
  • with or without wiper
  • pipeless oil supply
Operating pressure:pmax. 500 bar
Operating principle:single-acting with spring return
Piston Ø20, 25 and 32 mm
Stroke:4 and 8 mm
Thrust force:from 3.1 kN at 100 bar to 40.2 kN at 500 bar
Seal typeNBR -10°C to +80°C, FKM up to 150°C
Oil connection:

drilled channels

Wiper:

with or without soft wiper