Mini Screw-in Cylinder

Mini Screw-in Cylinder

These single-acting screw-in cylinders are ideal for clamping small workpieces thanks to their small-format design. With a small cylinder distance from as little as 15 mm, the screw-in cylinders can be screwed into multiple clamping devices to save space.

These single-acting screw-in cylinders are ideal for clamping small workpieces thanks to their small-format design. With a small cylinder distance from as little as 15 mm, the screw-in cylinders can be screwed into multiple clamping devices to save space. The pressure oil is supplied via drilled channels. The cylinder is sealed against the base in the threaded hole using the supplied edge seal. Workpiece tolerances of more than 20 mm can be compensated for using a sealing nut (accessory). The sealing nut allows infinite adjustment of the screw-in depth of the cylinder, sealing the cylinder against leakage at the top edge of the threaded hole.

Important notes:
The screw-in cylinder with spring return cannot be loaded when released and retracted. Protect the cylinders from direct exposure to aggressive cutting fluids and coolants. General operating conditions and other information can be found in the catalog or on the Internet on the page: "Recommendations & parameters".

Special features:

  • Ideal for clamping small workpieces
  • Space-saving installation options
  • Infinitely adjustable screw-in depths
  • Pipe-less pressure oil supply via drilled channels
  • Standard cylinders and special variants available
Operating pressure:pmin. 5 bar,
pmax. 500 bar
Operating principle:

Single-acting with spring return

Piston Ø8 mm
Stroke:5, 10 and 16 mm
Clamping force:from 0.5 kN at 100 bar to 2.5 kN at 500 bar
Oil requirement

0.5 cm³/10 mm stroke

Oil connection:

drilled channels

Seal type:

NBR -10°C to +80°C