Mini support element, screw-in

Mini support element, screw-in

When it comes to avoiding vibrations and deflection when machining workpieces, these support elements are the ideal support. Mini support elements are suitable for clamping fixtures where a large number of support points are required in a confined space.

When it comes to avoiding vibrations and deflection when machining workpieces, these support elements are the ideal support. Mini support elements are suitable for clamping fixtures where a large number of support points are required in a confined space. Another area of application is the machining of small workpieces. The very compact screw-in housing allows horizontal and vertical mounting in the clamping fixture. This means that space-saving arrangements can be realized even in confined installation conditions. The pressure oil is supplied via a drilled channel in the mounting hole. The support plunger is applied to the workpiece with a hydraulically pre-tensioned spring. The basic position of the bolt is retracted. The hydraulic clamping can be combined with the hydraulic clamping of the workpiece or carried out separately.

Special features:

  • Ideal for small workpieces
  • Ideal for thin-walled workpieces
  • Arrangement with a high number of
    support points possible
  • Space-saving horizontal/vertical installation possible
  • Clamping possible separately or combined with clamping process
  • Pressurized oil supply via drilled channels
  • Sealing air, ventilation
Operating pressure:pmax. 200 bar
Mode of operation:Application by hydraulics
Support bolt:Ø 7 mm, stroke 4 mm
Load:Maximum 1000 N
at 200 bar
Spring force min:5 N
Spring force max:10 N
Oil connection:

drilled channels

Wiper:

Soft wiper